Ask about Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid
Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid is a two-step rubber mask designed to provide intensive hydration, reduce the feeling of dryness and leave the skin feeling softer, smoother and more refreshed.
The treatment combines a concentrated moisturizing ampoule with a ready-to-use rubber mask that closely covers the face and helps keep the formula in contact with the skin. Hyaluronic acid supports moisture retention and helps improve the appearance of dehydrated skin, while the cooling rubber mask provides a refreshing and comforting sensation during use.
Benefits
- Provides intensive moisturizing care.
- Helps reduce dryness and tightness.
- Supports softer and smoother-feeling skin.
- Helps maintain moisture and improve skin comfort.
- Provides a cooling and refreshing sensation.
- Ready-to-use rubber mask requires no mixing.
Who is it for
- Dry skin.
- Dehydrated skin.
- Skin prone to tightness or flaking.
- Dull and tired-looking skin.
- Skin in need of additional moisturizing care.
Key ingredient
- Hyaluronic Acid – helps attract and retain moisture, supporting a plumper, smoother and more hydrated-looking complexion.
How to use
- Apply the moisturizing ampoule generously to clean facial skin.
- Remove the rubber mask from the packaging and peel away the protective film.
- Apply the lower section first, followed by the upper section, and gently press the mask so that it fits closely to the face.
- Leave on for 30–40 minutes.
- Remove the mask and gently pat the remaining ampoule into the skin until absorbed.
- Any remaining product can be applied to the neck, hands or other dry areas.
FAQ
Does Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid need to be mixed before use?
No. The rubber mask is already formed and ready to apply after the ampoule step.
How long should Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid be left on?
Leave the mask on for approximately 30–40 minutes before removing it.
Does the remaining ampoule need to be rinsed off?
No. Gently pat the remaining product into the skin until fully absorbed.
Warnings
- For external use only.
- Avoid direct contact with eyes and lips.
- Discontinue use if redness, swelling, itching or irritation occurs.
- Do not use on damaged or irritated skin.
- Use immediately after opening.
- Do not reuse the rubber mask.
- Keep out of reach of children.
- Store away from direct sunlight and excessive heat.
STEP 01 Dr.Jart Hyaluronic Acid 1000 ppm Ampoule Water/Eau, Dipropylene Glycol, Glycerin, Caprylic/Capric Triglyceride, Niacinamide, 1,2-Hexanediol, Butylene Glycol, PEG-240/HDI Copolymer Bis-Decyltetradeceth-20 Ether, Glyceryl Stearate, PEG-100 Stearate, Sorbitan Sesquioleate, Glycereth-26, Dimethicone, Cetearyl Alcohol, Trehalose, Mangifera Indica (Mango) Seed Butter, Macadamia Ternifolia Seed Oil, Sodium Hyaluronate, Glyceryl Acrylate/Acrylic Acid Copolymer, Ethylhexylglycerin, Disodium EDTA, Betaine, Allantoin, Melia Azadirachta Leaf Extract, Melia Azadirachta Flower Extract, Coccinia Indica Fruit Extract, Tocopherol, Potassium Laurate, Solanum Melongena (Eggplant) Fruit Extract, Aloe Barbadensis Flower Extract, Simmondsia Chinensis (Jojoba) Seed Oil, Ocimum Sanctum Leaf Extract, Curcuma Longa (Turmeric) Root Extract, Corallina Officinalis Extract, Undaria Pinnatifida Extract, Musa Sapientum (Banana) Fruit Extract, Cynara Scolymus (Artichoke) Leaf Extract, Brassica Oleracea Capitata (Cabbage) Leaf Extract, Asparagus Officinalis Extract, Allium Cepa (Onion) Bulb Extract
STEP 02 Dr.Jart Cryo Rubber Moisturizing Mask Water/Eau, Methylpropanediol, Chondrus Crispus Extract, Glycerin, Xanthan Gum, Ceratonia Siliqua (Carob) Gum, Potassium Chloride, Dipropylene Glycol, Hydroxyacetophenone, Sucrose, Panthenol, Polyglyceryl-10 Laurate, Algin, Titanium Dioxide/CI 77891, Caprylyl Glycol, Allantoin, Calcium Chloride, Melia Azadirachta Leaf Extract, Melia Azadirachta Flower Extract, Dipotassium Glycyrrhizate, Butylene Glycol, Ethylhexylglycerin, Coccinia Indica Fruit Extract, Disodium EDTA, Sodium Citrate, Citric Acid, Solanum Melongena (Eggplant) Fruit Extract, Aloe Barbadensis Flower Extract, Xylitylglucoside, Simmondsia Chinensis (Jojoba) Seed Oil, Anhydroxylitol, Ocimum Sanctum Leaf Extract, Curcuma Longa (Tumeric) Root Extract, Corallina Officinalis Extract, Xylitol, Laminaria Japonica Extract", Hydrogen Dimethicone, Glucose, Kaolin, Diatomaceous Earth/Terre de diatomées
Whitman LBS NV
Nijverheidsstraat 15. Oevel/Westerlo, Belgium 2260.
contactmanufacturer@elcompanies.com
Delivery conditions depend on the destination and delivery method. See our delivery page for current prices, estimated times and free delivery conditions.
DESCRIPTION
Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid is a two-step rubber mask designed to provide intensive hydration, reduce the feeling of dryness and leave the skin feeling softer, smoother and more refreshed.
The treatment combines a concentrated moisturizing ampoule with a ready-to-use rubber mask that closely covers the face and helps keep the formula in contact with the skin. Hyaluronic acid supports moisture retention and helps improve the appearance of dehydrated skin, while the cooling rubber mask provides a refreshing and comforting sensation during use.
Benefits
- Provides intensive moisturizing care.
- Helps reduce dryness and tightness.
- Supports softer and smoother-feeling skin.
- Helps maintain moisture and improve skin comfort.
- Provides a cooling and refreshing sensation.
- Ready-to-use rubber mask requires no mixing.
Who is it for
- Dry skin.
- Dehydrated skin.
- Skin prone to tightness or flaking.
- Dull and tired-looking skin.
- Skin in need of additional moisturizing care.
Key ingredient
- Hyaluronic Acid – helps attract and retain moisture, supporting a plumper, smoother and more hydrated-looking complexion.
How to use
- Apply the moisturizing ampoule generously to clean facial skin.
- Remove the rubber mask from the packaging and peel away the protective film.
- Apply the lower section first, followed by the upper section, and gently press the mask so that it fits closely to the face.
- Leave on for 30–40 minutes.
- Remove the mask and gently pat the remaining ampoule into the skin until absorbed.
- Any remaining product can be applied to the neck, hands or other dry areas.
FAQ
Does Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid need to be mixed before use?
No. The rubber mask is already formed and ready to apply after the ampoule step.
How long should Dr. Jart+ Cryo Rubber with Moisturizing Hyaluronic Acid be left on?
Leave the mask on for approximately 30–40 minutes before removing it.
Does the remaining ampoule need to be rinsed off?
No. Gently pat the remaining product into the skin until fully absorbed.
Warnings
- For external use only.
- Avoid direct contact with eyes and lips.
- Discontinue use if redness, swelling, itching or irritation occurs.
- Do not use on damaged or irritated skin.
- Use immediately after opening.
- Do not reuse the rubber mask.
- Keep out of reach of children.
- Store away from direct sunlight and excessive heat.
INGREDIENTS
STEP 01 Dr.Jart Hyaluronic Acid 1000 ppm Ampoule Water/Eau, Dipropylene Glycol, Glycerin, Caprylic/Capric Triglyceride, Niacinamide, 1,2-Hexanediol, Butylene Glycol, PEG-240/HDI Copolymer Bis-Decyltetradeceth-20 Ether, Glyceryl Stearate, PEG-100 Stearate, Sorbitan Sesquioleate, Glycereth-26, Dimethicone, Cetearyl Alcohol, Trehalose, Mangifera Indica (Mango) Seed Butter, Macadamia Ternifolia Seed Oil, Sodium Hyaluronate, Glyceryl Acrylate/Acrylic Acid Copolymer, Ethylhexylglycerin, Disodium EDTA, Betaine, Allantoin, Melia Azadirachta Leaf Extract, Melia Azadirachta Flower Extract, Coccinia Indica Fruit Extract, Tocopherol, Potassium Laurate, Solanum Melongena (Eggplant) Fruit Extract, Aloe Barbadensis Flower Extract, Simmondsia Chinensis (Jojoba) Seed Oil, Ocimum Sanctum Leaf Extract, Curcuma Longa (Turmeric) Root Extract, Corallina Officinalis Extract, Undaria Pinnatifida Extract, Musa Sapientum (Banana) Fruit Extract, Cynara Scolymus (Artichoke) Leaf Extract, Brassica Oleracea Capitata (Cabbage) Leaf Extract, Asparagus Officinalis Extract, Allium Cepa (Onion) Bulb Extract
STEP 02 Dr.Jart Cryo Rubber Moisturizing Mask Water/Eau, Methylpropanediol, Chondrus Crispus Extract, Glycerin, Xanthan Gum, Ceratonia Siliqua (Carob) Gum, Potassium Chloride, Dipropylene Glycol, Hydroxyacetophenone, Sucrose, Panthenol, Polyglyceryl-10 Laurate, Algin, Titanium Dioxide/CI 77891, Caprylyl Glycol, Allantoin, Calcium Chloride, Melia Azadirachta Leaf Extract, Melia Azadirachta Flower Extract, Dipotassium Glycyrrhizate, Butylene Glycol, Ethylhexylglycerin, Coccinia Indica Fruit Extract, Disodium EDTA, Sodium Citrate, Citric Acid, Solanum Melongena (Eggplant) Fruit Extract, Aloe Barbadensis Flower Extract, Xylitylglucoside, Simmondsia Chinensis (Jojoba) Seed Oil, Anhydroxylitol, Ocimum Sanctum Leaf Extract, Curcuma Longa (Tumeric) Root Extract, Corallina Officinalis Extract, Xylitol, Laminaria Japonica Extract", Hydrogen Dimethicone, Glucose, Kaolin, Diatomaceous Earth/Terre de diatomées
PRODUCT INFORMATION
Whitman LBS NV
Nijverheidsstraat 15. Oevel/Westerlo, Belgium 2260.
contactmanufacturer@elcompanies.com
DELIVERY INFORMATION
Delivery conditions depend on the destination and delivery method. See our delivery page for current prices, estimated times and free delivery conditions.